PS-SYNC-1.5 module can be used both in a local branching scheme for a reference frequency signal of 2048 MHz or 2048 Mbps (G.703), and in a scheme for remote transmission of a sync signal over an optical channel. Branching occurs on 7 ports of the G.704 2048 standard.
• Design Subrack for installation in 19' chassis
• Monitoring and control RS-232 Telnet
Specifications:
Synchronization receive port Standard - ITU G.703 or 2048MHz Interface - 120 ohm, matched twisted pair Connector type - RJ-45 8P8C
Sync grant port Standard - ITU G.704 2048 Interface - 120 ohm, matched twisted pair Connector type - RJ-45 8P8C
Supply Supply voltage - Local supply -36 V ÷ -72 V DC Power consumption - < 12 W
PS-SYNC-MAX
BUY NOW
PS-SYNC-MAX module can be used both in a local branching scheme for a reference frequency signal of 2048 MHz or 2048 Mbps (G.703), and in a scheme for remote transmission of a sync signal over an optical channel. Branching occurs on 15 ports of the G.704 2048 standard
• Design Subrack for installation in 19' chassis
• Monitoring and control RS-232 Telnet
Specifications:
Synchronization receive port Standard - ITU G.703 or 2048MHz Interface - 120 ohm, matched twisted pair Connector type - RJ-45 8P8C
Sync grant port Standard - ITU G.704 2048 Interface - 120 ohm, matched twisted pair Connector type - RJ-45 8P8C
Supply Supply voltage - Local supply -36 V ÷ -72 V DC Power consumption - < 12 W
PS-CM-RL-E
BUY NOW
PS-CM-RL-E control module is installed in the PS-CH-156-L chassis and has two Fast Ethernet ports, one RS232/USB control port. The module provides -48V power input from the front panel, monitoring of current consumption and temperature, sending diagnostic SNMP messages in case of problems. In addition, the PS-CM-RL-E module provides centralized local via RS-232 or remote via Telnet access to the terminal menu of all modules installed in the PS-CH-156-L Subrack chassis
• Monitoring and control RS-232, Telnet, SNMP
Specifications:
Ethernet ports Standard - 100BASE-TX IEEE 802.3, 802.3u, 802.1q Transmission speed - 100 Mbps Transfer mode - full duplex Connector type - RJ-45 8P8C Frame length - 64 - 3700 bytes Additionally - Auto-MDIX, Auto-negotiation
Supply Supply voltage - Local supply -36 V ÷ -72 V DC Power redundancy - -36 V ÷ -72 V contacts for connecting the main and backup power supply Power consumption - < 5 W
PS-CH-156-L
BUY NOW
PS-CH-156-L chassis is used when it is necessary to install several boards in one construct. The chassis is used in conjunction with the PS-CM-RL-E module for -48V DC power supply and allows you to install up to 12 Subrack boards in one frame.
• Design 7U frame for installation in a standard 19’ rack
Specifications:
Supply Supply voltage - Local supply -36 V ÷ -72 V DC Power consumption - < 1 W